Product catalogue
Four engineered product lines, one qualified supplier. Every item below is in serial production and available for sample evaluation and volume orders.
Nine module series from 420 W to 720 W
N-type TOPCon and HJT half-cut cells, glass-glass bifacial construction, and frames engineered for 5,400 Pa snow and 2,400 Pa wind load. Residential all-black units through to large-format utility modules.
- Cell technology
- TOPCon · HJT · PERC
- Peak module efficiency
- 23.4 %
- Bifaciality factor
- up to 85 %
- Temperature coefficient
- −0.29 %/°C
- Degradation (year 1 / annual)
- 1.0 % / 0.4 %
Hybrid, string and central inverters
Battery-ready hybrid units for single-family homes, three-phase string inverters for commercial rooftops and central stations for utility plants. All models ship with country-specific grid-code firmware pre-loaded.
- Power range
- 3 – 350 kW
- Max efficiency
- 98.8 %
- European efficiency
- 98.4 %
- MPPT inputs
- 2 – 12
- Ingress protection
- IP66 · C5 corrosion
LFP storage from a wall box to a container
Integrated LFP systems with in-house BMS, liquid or air thermal management and certified fire suppression. Cell-to-system UL 9540A test data is available to qualified buyers under NDA.
- Capacity range
- 5 kWh – 5 MWh
- Cycle life
- 8,000 @ 80 % DoD, 25 °C
- Round-trip efficiency
- ≥ 94 %
- Chemistry
- LFP · UL 9540A tested
- Operating range
- −20 to 55 °C
Thermal UAV platforms and flight software
Purpose-built for energy assets: automated waypoint missions over module strings, radiometric capture, then AI-assisted classification of hotspots, bypass-diode faults, PID and cracked cells in the companion software.
- Thermal sensor
- 640 × 512 radiometric
- Visible sensor
- 48 MP · 1/2" CMOS
- Flight endurance
- 45 min (dual battery)
- Wind resistance
- 12 m/s
- Coverage rate
- 0.8 – 1.2 km² / hour
One container, four product lines.
Mixed loading is where a single-supplier relationship pays off: modules on the floor, inverters palletised, storage cabinets braced against the door — all on one bill of lading, one set of export documents, one point of accountability.
We supply a CAD loading diagram per order, so you know the exact CBM utilisation before the container leaves.
One claim desk, one RMA process and one technical contact for every line — no finger-pointing between vendors.
CO / Form A, IEC and UL test reports, MSDS for cells and product liability certificates issued with every shipment.
Need a datasheet, a sample or a price?
Tell us the models and volumes you are evaluating. We reply with technical documentation, sample lead time and FOB pricing within two business days.