Solutions by deployment type
Tell us the site, the tariff and the grid code. We return a bill of materials, a single-line diagram, an energy yield estimate and a landed-cost quotation — typically within five working days.
Home solar with backup power
Designed for installers who need to commission a system in one day and for homeowners who expect the lights to stay on during an outage.
- All-black modules — uniform appearance for pitched roofs and heritage areas.
- Hybrid inverter with 10 ms backup transfer — essential loads stay powered through grid loss.
- Stackable battery — start at 5 kWh and add modules later without changing the inverter.
- Single-day commissioning — pre-configured monitoring gateway and QR-code system registration.
- Typical system size
- 5 – 15 kWp
- Storage
- 5 – 20 kWh
- Self-consumption uplift
- 30 % → 75 %
- Backup runtime (critical loads)
- 8 – 12 hours
- Grid codes
- EN 50549 · AS/NZS 4777.2 · UL 1741
Rooftop generation with demand-charge control
For factories, warehouses, cold stores and logistics hubs where the electricity bill is dominated by demand charges rather than energy charges. Storage is sized against your 15-minute peak, not your monthly consumption.
- Peak shaving — a rolling 15-minute window controller with a configurable demand ceiling.
- Dual revenue accounting — arbitrage, demand savings and incentive income reported separately, so you can see which measure is actually earning.
- Load-shedding coordination — optional integration with your BMS to defer non-critical loads before the battery discharges.
- Diesel-free backup — ride through outages for critical process loads, with generator lockout.
- Typical system size
- 100 kWp – 5 MWp
- Storage
- 215 kWh – 3 MWh
- Demand charge reduction
- 15 – 30 %
- Modelled payback
- 3.5 – 5 years
- Load study
- Included, based on interval data
Ground-mount plants and grid-scale storage
Full DC and AC scope for EPC contractors delivering plants from 5 MWp upward — modules, central inverters, combiners, containerised storage and the compliance package your lender's technical advisor will ask for.
- Large-format modules — 700 – 720 W units reduce mounting, cabling and labour cost per MWp.
- 1,500 V DC architecture — central inverters at 99 % peak efficiency and reduced cable losses.
- Bankability package — IEC test reports, UL 9540A data, warranty reinsurance certificate and factory audit reports.
- Staged delivery — supply against a construction schedule with call-off warehousing at the destination port.
- Typical plant size
- 5 MWp – 500 MWp
- Storage counterpart
- 2.5 – 5 MWh per container block
- DC architecture
- 1,500 V
- Performance ratio modelled
- 81 – 84 %
- Lender package
- Available under NDA
Thermal inspection, delivered as a defect list
Buy the platform and fly it yourself, or buy the survey as a service. Either way the deliverable is the same: a geo-referenced defect register with estimated energy loss per finding, ranked by repair payback.
- Purchase the fleet — aircraft, software licences, training and spares for in-house inspection teams.
- Or commission the survey — periodic inspection with report delivery, no capital outlay and no pilot certification required on your side.
- Defect classification — hotspot, bypass diode, string open circuit, PID, soiling and delamination, each with a recommended remediation.
- Financial ranking — findings ordered by the value of lost generation they cause, so maintenance budget goes where it earns most.
- Survey coverage rate
- 0.8 – 1.2 km² / hour
- Defect location accuracy
- String + module position (RTK)
- Report turnaround
- 3 – 5 working days
- Fleet purchase
- 1 – 200 aircraft
- Service model
- Per survey or annual retainer
From first message to commissioning support
A predictable six-step process, with a named export engineer on your account from enquiry through to after-sales.
You send site conditions, quantities, destination port and required certifications. We confirm scope within one working day.
Bill of materials, single-line diagram, energy yield estimate and compliance checklist — free of charge.
FOB, CIF or DDP pricing with a container loading diagram and a delivery schedule. Valid 30 days.
Samples or pre-production units shipped for evaluation where the order value or specification risk justifies it.
Production with in-line QC, plus your own third-party inspection welcome at any stage, at our plant.
Export documentation, logistics tracking, commissioning support and a single claims desk for the warranty period.
Start with a technical proposal — no obligation
Send us your project outline and we will return a scope, a bill of materials and an indicative price. If it is not a fit, we will tell you that too.